PM (SE30)

Additional Information
Overview of the Service Module

The PM folder in Enter Service Calls (SE30) is only available if the Contract Billing (CT) module is installed and an active contract exists for the equipment with a Preventative Maintenance schedule set up, and the Type of Call (SE14) for the Service Call has the Preventative Maintenance flag set.

  • The purpose of the PM folder is to display the Preventative Maintenance schedule set up in Contract Maintenance (CT30) and to flag which component of the PM schedule is complete.

  • For more information on Call Types click here.

The following list defines every field on the PM folder:

  • PM Program - displays the 'PM Program' set up on the PM folder of CT30 for the customer/equipment record entered in the header section. You cannot edit the information in this field.

  • Frequency - displays the Frequency set up in the PM folder of CT30 for the customer/equipment record entered in the header section. The frequency can be entered in either:

    • Months
      OR
    • Days

    You cannot edit the Frequency information.

  • Last PM Date - displays the date the last PM was performed. This information is taken from the PM folder in CT30. You cannot edit the information in this field.

  • Next PM Date - displays the date the next PM is due. This information is taken from the PM folder in CT30. You cannot edit the information in this field.

  • Due - when this check box is selected, the equipment is due for preventative maintenance based on the 'Next PM Date'. You cannot edit this field.

  • Done - select this check box when preventative maintenance work has been performed. This will cause the Invoice Listing and Creation (SE42) program to advance the 'Last PM Date' and 'Next PM Date' on the Contract Master (CT30).

  • Maintenance Details - the Maintenance Details list box displays any maintenance details entered in the PM folder of CT30. You cannot edit the information in this field.

The following fields are populated once a record is recalled from the Meter List Box:

  • Meter - displays the Meter number that is recalled from the Meter list box.

  • Due - if this check box is selected, the equipment is due for a Preventative Maintenance visit as per the schedule set up for this meter in the PM folder of CT30. This check box cannot be modified.

  • Done - select this check box if the preventative maintenance requirements are satisfied for the schedule set up for the meter in the PM folder of CT30. This field controls the update in SE42 of the 'Last Meter Reading' field which is necessary in determining when the next PM will be due for the meter.

  • Maximum - displays the maximum meter reading before a Preventative Maintenance visit is due from the PM folder of Contract Maintenance. You cannot edit this field.

  • Range - displays the number of meter units between Preventative Maintenance visits from the PM folder in CT30. You cannot edit this field.

  • Last Meter - displays the meter reading at the time of the last Preventative Maintenance visit. This field cannot be modified.

  • Current Meter - enter the meter reading at the time the Preventative Maintenance work is done.

The following table outlines the functionality of each button in the PM folder:

Button Label Icon Functionality
Update Update Saves the information entered on the current folder.
Delete Delete Clears all of the information (including the meters listed in the Meter List Box and any of the PM information from Contract Maintenance (CT30)). Note: Once the PM information in SE30 is deleted, the same information is automatically removed from the PM Program folder in CT30.
New New Clears the current service call information allowing you to enter a new service call or recall an existing service call. Note: If you click New before you update the record, changes to the meters will not be saved.
New Record New Record Clears all of the information in the Meter list box. The informatino is not deleted. To retrieve the information, click on any other field and then click on the PM folder again.
Dispatch Query Dispatch Query Locates a specific service call, or dispatches calls without opening the call in SE30. The Dispatch Service Calls browser contains the following information and functionality:

  • List Box - includes the following columns of information: Customer, Technician, City, Type, Equipment, Status (if the service call has been dispatched 'Disp'd' displays in the column), Call Date and Time.
  • Undispatched - when this radio button is selected only un-dispatched calls display.
  • All Calls - when this radio button is selected all calls are displayed.
  • Sort by - gives you the option to select one of multiple sort methods to review the open calls the list box though a drop list.
  • Name, Location, Service Call, Address 1, Address 2, City, Contact, Telephone - displays Customer and Contact information for the selected service call.
  • List Box - displays the details entered for the selected service call.
  • Select - the Select button opens the selected service call in the list box in SE30.
  • Dispatch Now - the Dispatch Now button sets the status of the selected service call in the list box to 'dispatched'.

Note: You cannot dispatch Service Calls in the following scenarios:

  • If the service call is an estimate.
  • If the service call contains missing mandatory fields.
  • If the service call is already dispatched.
  • If the service call is closed.
  • If the service call is for a customer that is on a credit hold.

    SE30/PM
    Enter Service Calls (SE30/PM)